Chapter 3: Maintaining Your Server
Using the FRU/SDR Load utility
The Field Replaceable Unit and Sensor Data Record (FRU/SDR) load utility is a
program used to update the server's FRU and SDR information.
To use the FRU/SDR Load utility:
1
Boot your server from the Server Companion CD, then select
Utility
2
Run the frusdr.exe file.
Viewing sensor data records
To view the Sensor Data Records (SDR):
1
Boot your server from the Server Companion CD, then select
Utility
2
In the SSU Main window, click
3
Click a category in the left pane. The category expands to show a list of
SDRs for that category.
4
Click an SDR. Information for that SDR is displayed.
Setting up remote access
You can set up the server so you can perform system management tasks
remotely.
Setting up remote LAN access
To set up remote LAN access:
1
Boot your server from the Server Companion CD, then select
Utility
2
In the SSU Main window, click
26
from the menu. The System Setup Utility starts.
from the menu. The System Setup Utility starts.
from the menu. The System Setup Utility starts.
www.gateway.com
.
SDR Manager
Platform Event Manager (PEM)
System Setup
System Setup
System Setup
.