Replacing the front panel board
The front panel board contains the actual LEDs, buttons, and ports that are
accessed from the front panel of your server.
To replace the front panel board:
1
Follow the instructions in
page
36. Make sure that you turn off the server, then unplug the power
cords and all other cables connected to the server.
2
Remove the top rear panel. For instructions, see
panel" on page
3
Remove the top front panel. For instructions, see
panel" on page
4
Unplug the three cables that are connected to the front panel board.
"Preventing static electricity discharge" on
41.
43.
www.gateway.com
Replacing the front panel board
"Removing the top rear
"Removing the top front
89