Gateway 995 User Manual page 94

Chapter 4: Installing Components
Important
8
Reinstall the memory board into the server. Make sure that the edges of
the board slide into the memory board guides inside the server.
9
Reinstall all panels.
10
Turn on the server, then make sure that the operating system completely
loads. If you receive an error, see
88
Install memory first into Bank 1, Bank 2, then Bank 3. If
memory is installed incorrectly, your server will not start.
Partially filled banks are ignored by the server.
Memory board guides
"Memory" on page
www.gateway.com
141.