Gateway 995 User Manual page 36

Chapter 3: Maintaining Your Server
6
Click
7
Click
8
In the PEM window, click
9
Click to select the
10
In the
successive pages. The valid range is 0-255 where 0 disables the blackout
period. Setting a blackout period can save you from being flooded with
repeat pages. After you receive a PEP page, no additional pages are sent
by PEP for the duration of the blackout period.
11
In the
and the message you want sent with the page. The maximum length for
the paging string is determined at runtime from firmware. You will be
notified if the string is truncated. Following a save, the actual string saved
is displayed in the edit box.
12
Click
13
In the Platform Event Paging Actions window, move the events that you want
to generate an alert to the
the
■
■
■
■
14
Click
15
Click
16
To send a test page to verify that you have correctly configured PEP, click
Options
17
Click
18
Click
30
to save the changes.
Save
to return to the PEM window.
Close
Enable PEP
box, type the minimum time, in minutes, between
Blackout Period
box, type the telephone number to dial for the page
Paging String
, then click
Options
column by clicking the following buttons:
Disabled
>> Moves all events from the Enabled list to the Disabled list.
> Moves the selected event from the Enabled list to the Disabled list.
< Moves the selected event from the Disabled list to the Enabled list.
<< Moves all events from the Disabled list to the Enabled list.
to save the changes.
Save
to return to the PEP Configuration window.
Close
, then click
Send Alert
to save the configuration.
Save
to return to the Platform Event Manager window.
Close
www.gateway.com
.
Configure PEP
check box.
Configure Event Actions
column and move all other events to
Enabled
.
.