Installing The Server Handles - Gateway 995 User Manual

Chapter 4: Installing Components

Installing the server handles

The handles help you hold the server while sliding it out of the cabinet for
servicing. Installing the server handles is usually performed as part of the
procedure for installing the server into a cabinet. For more information, see
the Gateway 995 Series Server Rack Installation Guide.
To install the handles:
1
Line up the screw holes on each handle with the corresponding holes on
the front of the server.
2
Insert and tighten two screws for each handle. The screws come in a small
bag with the handles.
38 www.gateway.com