Gateway 995 User Manual page 138

Chapter 6: Troubleshooting
CP
B4
B5
B6
B7
B8
BC
BE
BF
C0
C8
C9
DO
D2
D4
D6
D8
DA
DC
Recovery boot codes
The table below lists Port-80 codes and explanations displayed during the
recovery boot process. Not all codes are associated with an audio tone (beep).
The check point (CP) column lists the message's check point as seen by a port
80h card.
132
Beeps Reason
1 One short beep before boot
Display MultiBoot menu
Check password, password is checked
before option ROM scan
ACPI initialization
Clear global descriptor table
Clear parity checkers
Clear screen (optional)
Check virus and backup reminders
Try to boot with INT 19
Forced shutdown
Flash recovery
Interrupt handler error
Unknown interrupt error
Pending interrupt error
Initialize option ROM error
Shutdown error
Extended Block Move
Shutdown 10 error
CP Reason
E0 Initialize chip set
E1 Initialize bridge
www.gateway.com