Cisco Catalyst 3750-X Command Reference Manual page 378
Cisco ios release 15.2(1)e and later
Hide thumbs
Also See for Catalyst 3750-X:
- Software configuration manual (1438 pages) ,
- Message manual (150 pages) ,
- Getting started manual (22 pages)
Table of Contents
Advertisement
lacp port-priority
Examples
This example shows how to configure the LACP port priority on a port:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# lacp port-priority 1000
You can verify your settings by entering the show lacp [channel-group-number] internal privileged
EXEC command.
Related Commands
Command
channel-group
lacp system-priority
show lacp
internal
Catalyst 3750-X and 3560-X Switch Command Reference
2-346
[channel-group-number]
Chapter 2
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Assigns an Ethernet port to an EtherChannel group.
Configures the LACP system priority.
Displays internal information for all channel groups or for
the specified channel group.
OL-29704-01
Advertisement
Table of Contents
