Show Policy-Map - Cisco Catalyst 3750-X Command Reference Manual

show policy-map

show policy-map
Use the show policy-map user EXEC command to display quality of service (QoS) policy maps, which
define classification criteria for incoming traffic. Policy maps can include policers that specify the
bandwidth limitations and the action to take if the limits are exceeded.
Syntax Description
policy-map-name
class class-map-name
Note Though visible in the command-line help string, the control-plane and interface keywords are not
supported, and the statistics shown in the display should be ignored.
Command Modes User EXEC
Command History Release
12.2(53)SE2
Examples This is an example of output from the show policy-map command:
Switch> show policy-map
Policy Map videowizard_policy2
class
set dscp 34
police 100000000 2000000 exceed-action drop
Policy Map mypolicy
class
set dscp 6
Related Commands Command
policy-map
Catalyst 3750-X and 3560-X Switch Command Reference
2-782
show policy-map [policy-map-name [class class-map-name]]
(Optional) Display the specified policy-map name.
(Optional) Display QoS policy actions for a individual class.
Modification
This command was introduced.
videowizard_10-10-10-10
dscp5
Description
Creates or modifies a policy map that can be attached to multiple ports to specify a
service policy.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-29704-01