Show Pagp - Cisco Catalyst 3750-X Command Reference Manual

show pagp

show pagp
Use the show pagp user EXEC command to display Port Aggregation Protocol (PAgP) channel-group
information.
Syntax Description channel-group-number
counters
dual-active
internal
neighbor
Command Modes
User EXEC
Command History Release
12.2(53)SE2
Usage Guidelines You can enter any show pagp command to display the active channel-group information. To display the
nonactive information, enter the show pagp command with a channel-group number.
Examples This is an example of output from the show pagp 1 counters command:
Switch> show pagp 1 counters
Port
--------------------------------------
Channel group: 1
Gi1/0/1
Gi1/0/2
This is an example of output from the show pagp dual-active command:
Switch> show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
Channel group 1
Port
Gi1/0/1
Gi1/0/2
<output truncated>
Catalyst 3750-X and 3560-X Switch Command Reference
2-780
show pagp [channel-group-number] {counters | dual-active | internal | neighbor}
(Optional) Number of the channel group. The range is 1 to 48.
Display traffic information.
Display the dual-active status.
Display internal information.
Display neighbor information.
Modification
This command was introduced.
Information
Sent Recv
45 42
45 41
Dual-Active Partner
Detect Capable Name
No Switch
No Switch
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Flush
Sent Recv
0 0
0 0
Partner
Port
Gi3/0/3
Gi3/0/4
Partner
Version
N/A
N/A
OL-29704-01