Show Mka Statistics - Cisco Catalyst 3750-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

show mka statistics

To display global MACsec Key Agreement (MKA) Protocol statistics and error counters from active and
previous MKA sessions, use the show mka statistics privileged EXEC command
Syntax Description interface interface-id
port-id port-id
local-sci sci
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Examples This is an example of the show mka statistics command output:
SWitch# show mka statistics
MKA Global Statistics
=====================
MKA Session Totals
Secured.................... 32
Reauthentication Attempts.. 31
Deleted (Secured).......... 1
Keepalive Timeouts......... 0
CA Statistics
Pairwise CAKs Derived...... 32
Pairwise CAK Rekeys........ 31
Group CAKs Generated....... 0
Group CAKs Received........ 0
SA Statistics
SAKs Generated............. 32
SAKs Rekeyed............... 31
SAKs Received.............. 0
SAK Responses Received..... 32
MKPDU Statistics
MKPDUs Validated & Rx...... 580
OL-29704-01
show mka statistics [interface interface-id port-id port-id] | [local-sci sci]}
(Optional) Displays statistics for an MKA session on an interface. Only
physical interfaces are valid.
Displays a summary of active MKA sessions running on the interface with
the specified port ID. To see the port ID, enter the show mka session or show
mka session interface interface-id command. Port identifier values begin at
2 and monotonically increase for each new active session using a virtual port
on the same physical interface.
(Optional) Shows statistics for an MKA session identified by its Local
TX-SCI. To determine the Local TX-SCI for a session, enter the show mka
session detail command. The SCI must be 8 octets (16 hexadecimal digits)
long.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show mka statistics
2-751