show vmps
show vmps
Use the show vmps user EXEC command without keywords to display the VLAN Query Protocol (VQP)
version, reconfirmation interval, retry count, VLAN Membership Policy Server (VMPS) IP addresses,
and the current and primary servers, or use the statistics keyword to display client-side statistics.
Syntax Description
statistics
Command Modes
User EXEC
Command History
Release
12.2(53)SE2
Examples
This is an example of output from the show vmps command:
Switch> show vmps
VQP Client Status:
--------------------
VMPS VQP Version:
Reconfirm Interval: 60 min
Server Retry Count: 3
VMPS domain server:
Reconfirmation status
---------------------
VMPS Action:
This is an example of output from the show vmps statistics command.
in the display.
Switch> show vmps statistics
VMPS Client Statistics
----------------------
VQP
VQP
VMPS Changes:
VQP
VQP
VQP
VQP
VQP
Table 2-53
Field
VQP Queries
VQP Responses
Catalyst 3750-X and 3560-X Switch Command Reference
2-830
show vmps [statistics]
(Optional) Display VQP client-side statistics and counters.
Modification
This command was introduced.
1
other
Queries:
Responses:
Shutdowns:
Denied:
Wrong Domain:
Wrong Version:
Insufficient Resource: 0
show vmps statistics Field Descriptions
Description
Number of queries sent by the client to the VMPS.
Number of responses sent to the client from the VMPS.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
0
0
0
0
0
0
0
Table 2-53
describes each field
OL-29704-01