Show Platform Ip Multicast - Cisco Catalyst 3750-X Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform ip multicast

Use the show platform ip multicast privileged EXEC command to display platform-dependent IP
multicast tables and other information.
This command is not supported on switches running the LAN base feature set.
Note
Syntax Description acl-full-info
counters
groups
hardware [detail]
interfaces
locks
mdfs-routes
mroute-retry
retry
trace
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
OL-29704-01
show platform ip multicast {acl-full-info | counters | groups | hardware [detail] | interfaces |
locks | mdfs-routes | mroute-retry | retry | trace}
Display IP multicast routing access-control list (ACL) information, in
particular the number of outgoing VLANs for which router ACLs at the
output cannot be applied in hardware.
Display IP multicast counters and statistics.
Display IP multicast routes per group.
Display IP multicast routes loaded into hardware. The optional detail
keyword is used to show port members in the destination index and route
index.
Display IP multicast interfaces.
Display IP multicast destination-index locks.
Display multicast distributed fast switching (MDFS) IP multicast routes.
Display the IP multicast route retry queue.
Display the IP multicast routes in the retry queue.
Display the IP multicast trace buffer.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform ip multicast
C-11