Show Vlan Access-Map - Cisco Catalyst 3750-X Command Reference Manual

show vlan access-map

show vlan access-map
Use the show vlan access-map privileged EXEC command to display information about a particular
VLAN access map or for all VLAN access maps.
Note This command is not supported on switches running the LAN base feature set.
Syntax Description mapname
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Examples
This is an example of output from the show vlan access-map command:
Switch# show vlan access-map
Vlan access-map "SecWiz"
Match clauses:
Action:
Related Commands Command
show vlan filter
vlan access-map
vlan filter
Catalyst 3750-X and 3560-X Switch Command Reference
2-828
show vlan access-map [mapname]
(Optional) Name of a specific VLAN access map.
Modification
This command was introduced.
10
ip address: SecWiz_Gi0_3_in_ip
ip address: SecWiz_Fa10_3_in_ip
forward
Description
Displays information about all VLAN filters or about a particular VLAN or
VLAN access map.
Creates a VLAN map entry for VLAN packet filtering.
Applies a VLAN map to one or more VLANs.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-29704-01