Show Psp Statistics - Cisco Catalyst 3750-X Command Reference Manual

show psp statistics

show psp statistics
To display the number of packets dropped for all protocols when protocol storm protection is configured,
use the show psp statistics privileged EXEC command.
Syntax Description arp
dhcp
igmp
Command Modes Privileged EXEC
Command History Release
12.2(58)SE
Examples This is an example of output from the show psp statistics dhcp command when protocol storm
protection is configured for DHCP. The output shows that 13 packets were dropped.
Switch# show psp statistics dhcp
----------------------------------
PSP Protocol Drop Counter Summary:
----------------------------------
DHCP Drop Counter: 13
Related Commands Command
psp {arp | dhcp | igmp} pps value Configures protocol storm protection for ARP, DHCP, or IGMP.
show psp config
clear psp counter
Catalyst 3750-X and 3560-X Switch Command Reference
2-792
show psp statistics [arp | dhcp | igmp]
(Optional) Show the number of packets dropped for ARP and ARP snooping.
(Optional) Show the number of packets dropped for DHCP and DHCP snooping.
(Optional) Show the number of packets dropped for IGMP and IGMP snooping.
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Displays the protocol storm protection configuration.
Clears the counter of dropped packets.
OL-29704-01