Show Inventory - Cisco Catalyst 3750-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

show inventory

Use the show inventory user EXEC command to display product identification (PID) information for
the hardware.
Syntax Description entity-name
raw
Command Modes
User EXEC
Command History Release
12.2(53)SE2
Usage Guidelines The command is case sensitive. With no arguments, the show inventory command produces a compact
dump of all identifiable entities that have a product identifier. The compact dump displays the entity
location (slot identity), entity description, and the unique device identifier (UDI) (PID, VID, and SN) of
that entity.
If there is no PID, no output appears when you enter the show inventory command.
Note
Examples This is example output from the show inventory command:
Switch> show inventory
NAME: "5", DESCR: "WS-xxxxxxxx"
PID: WS-xxxxxxx , VID: E0 , SN: CAT0749R204
OL-29704-01
show inventory [entity-name | raw]
(Optional) Display the specified entity. For example, enter the interface
(such as gigabitethernet1/0/1) into which a small form-factor pluggable
(SFP) module is installed.
(Optional) Display every entity in the device.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show inventory
2-665