Cisco Catalyst 3750-X Command Reference Manual page 607

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

Related Commands

boot auto-copy-sw

auto-download-sw

boot config-file

boot enable-break

private-config-file

Enables the automatic upgrade (auto-upgrade) process to automatically

upgrade a switch in version-mismatch (VM) mode.

This command is available only on stacking-capable switches.

Specifies the software image to use in the auto-upgrade process.

This command is available only on stacking-capable switches.

Specifies the filename that Cisco IOS uses to read and write a nonvolatile

copy of the system configuration.

Enables interrupting the automatic boot process.

Enables manually booting the switch during the next boot cycle.

Specifies the filename that Cisco IOS uses to read and write a nonvolatile

copy of the private configuration.

Specifies the Cisco IOS image to load during the next boot cycle.

Catalyst 3750-X and 3560-X Switch Command Reference

Catalyst 3560-x