rep segment
You can verify your settings by entering the show interfaces rep privileged EXEC command. To verify
which port in the segment is the primary edge port, enter the show rep topology privileged EXEC
command.
Related Commands
Command
show interfaces rep
[detail]
show rep topology
[detail]
Catalyst 3750-X and 3560-X Switch Command Reference
2-536
Chapter 2
Description
Displays REP configuration and status for all interfaces or the specified
interface.
Displays information about all ports in the segment, including which one was
configured and selected as the primary edge port.
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-29704-01