Power Supply - Cisco Catalyst 3750-X Command Reference Manual

power supply

power supply
Use the power supply user EXEC command on the switch stack or on a standalone switch to configure
and manage the internal power supplies on the switch.
Syntax Description switch-number
reset {hard | soft}
slot {A | B}
off
on
Defaults
The switch power supply is on.
Command Modes
User EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
The power supply command applies to a Catalyst 3560-X switch, a Catalyst 3750-X standalone switch,
or a switch stack with only Catalyst 3750-X switches.
In a switch stack with only Catalyst 3750-X switches, you must specify the stack member before
entering the reset {hard | soft} or slot {A | B} off or on keywords.
The no power supply user EXEC command is not supported. To return to the default setting, use the
power supply switch-number on command.
Examples This example shows how to reset everything (including hardware) for stack member 2 in a switch stack:
Switch> power supply 2 reset hard
Catalyst 3750-X and 3560-X Switch Command Reference
2-494
power supply switch-number {reset {hard | soft} slot {A | B} {off | on}}
Specify the stack member. The range is 1 to 9, depending on the switch
member numbers in the stack.
This parameter is available only on on stacking-capable switches.
Reset the switch or switch software.
Specify a switch power supply to set.
Note
Set the switch power supply off.
Set the switch power supply on.
Modification
This command was introduced.
Chapter 2
reset hard —Reset everything, including switch hardware.
•
• reset soft —Reset the switch software only.
A —Select the power supply in slot A.
•
B —Select the power supply in slot B.
•
Power supply slot B slot is the closest to the outer edge of the
switch.
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-29704-01