Show Storm-Control - Cisco Catalyst 3750-X Command Reference Manual

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

show storm-control

Use the show storm-control user EXEC command to display broadcast, multicast, or unicast storm

control settings on the switch or on the specified interface or to display storm-control history.

Syntax Description

interface-id

Command Modes

Command History

Usage Guidelines

When you enter an interface-id, the storm control thresholds appear for the specified interface.

If you do not enter an interface-id, settings appear for one traffic type for all ports on the switch.

If you do not enter a traffic type, settings appear for broadcast storm control.

This is an example of a partial output from the show storm-control command when no keywords are

entered. Because no traffic-type keyword was entered, the broadcast storm control settings appear.

Switch> show storm-control

Catalyst 3750-X and 3560-X Switch Command Reference

show storm-control [interface-id] [broadcast | multicast | unicast]

(Optional) Interface ID for the physical port (including type, stack member

(stacking-capable switches only), module, and port number).

(Optional) Display broadcast storm threshold setting.

(Optional) Display multicast storm threshold setting.

(Optional) Display unicast storm threshold setting.

Modification

This command was introduced.

Filter State

-------------

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

Catalyst 3560-x