Cisco Catalyst 3750-X Command Reference Manual page 518

power inline consumption
%CAUTION: Interface Gi1/0/2: Misconfiguring the 'power inline
command may cause damage to the switch and void
oversubscribe the power supply.
It is recommended to enable power policing if the switch supports it.
Refer to documentation.
You can verify your settings by entering the show power inline consumption privileged EXEC
command.
Related Commands Command
power inline
show power inline
Catalyst 3750-X and 3560-X Switch Command Reference
2-486
Chapter 2
Description
Configures the power management mode on PoE ports.
Displays the PoE status for the specified PoE port or for all PoE ports.
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
consumption/allocation'
your warranty. Take precaution not to
OL-29704-01