Table of Programmable Parameters
3.2 Table of Programmable Parameters
®
All programmable parameters of 2N
EasyRoute are listed in this section. The unit
®
used, description of 2N
EasyRoute's behaviour upon a change, setting options, the
setting step and the default (initialisation) setting are included for each parameter.
The figure below gives an insight into the gateway configuration interface.
Figure 3.2
Gateway
Configuration
Interface
Basic Controls
Language Mutations
To select the language mutations of the configuration interface use the tags in the
right-hand upper corner. Two language mutations are available at present – Czech
and English.
20