2N EasyRoute User Manual page 35

Default setting:
RX AVC (Automatic Volume Control)
Enable/disable the automatic setting of the receiving signal volume.
Setting options:
Default setting:
RX AGC (Automatic Gain Control)
Enable/disable the automatic setting of the signal receive gain.
Setting options:
Default setting:
TX AGC (Automatic Gain Control)
Enable/disable the automatic setting of the signal transmit gain.
Setting options:
Default setting:
Volume
Here set the transmission and sidetone volumes.
Setting options:
Default setting:
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
Services
Enable GSM character set
Here enable/disable the GSM character set for SMS coding. This option is
automatically ticked off if none of the coding sets is selected.
Setting options:
Default setting:
Enable UCS2 character set
Here enable/disable the UCS2 (Unicode) character set for SMS coding.
Setting options:
Default setting:
Enable multipart SMS
Here enable/disable sending of multipart SMS messages. A multipart SMS means
a message longer than 160 characters without or 70 characters with diacritic
symbols and special characters.
Setting options:
Default setting:
Table of Programmable Parameters
Handset (ESEC)
ON/OFF
ON
ON/OFF
ON
ON/OFF
ON
0–7 (0 = muted, 7 = max)
3
ON/OFF
ON
ON/OFF
ON
ON/OFF
ON
35