Output signal strength
Set the output signal level for FAX modulation.
Default setting:
Buffer length
Set the total size of the buffer for the T.38 process. To get the actual value,
multiply the set value ten times. So, if the parameter is set to 50, the actual size
is 500ms.
Setting options:
Default setting:
Data redundancy (V.17, V.29, V.27)
Set the UDPTL protocol parameters. Define how many copies of the preceding
packets should be used for error correction.
Setting options:
Default setting:
Control data redundancy (V.21)
Set the UDPTL protocol parameters.
Setting options:
Default setting:
T.30 indicator duplication
Set how many times the indicator (CNG, CED, e.g.) should be copied.
Setting options:
Default setting:
Packets count for FEC
Set the count of packets for calculation of the XOR packet for FEC.
Setting options:
Default setting:
Transmit path gain
Set the gain for the output signal.
Default setting:
Receive path gain
Set the gain for the input signal.
Default setting:
Modulation start level
Set the buffer filling level for the beginning of data modulation.
Default setting:
Data request level
Set the buffer filling level for the moment another data request is sent.
Default setting:
Table of Programmable Parameters
10 dBm
0 – 100
50
0 - 6
3
0 - 6
3
0 - 6
4
0 - 6
2
96
96
320 ms
233 ms
51