2N EasyRoute User Manual page 31

Caution
By setting a frequency band you disable 2N
n
optimum frequency band, which may decelerate your data transmission
and deteriorate the VoIP call and FAX transmission quality. 2N
continuously evaluates the signal intensity and adjusts the frequency
bands accordingly to optimise the available connection options. Thus, we
recommend you to keep the factory settings.
Provider code (MCC+MNC)
The provider code is an identifier consisting of the Mobile Country Code (MCC) and
the Mobile Network Code (MNC). Use the parameter to select the provider to
®
which 2N EasyRoute should register the SIM for roaming purposes. Just select a
provider of an available network and the provider code will be set automatically.
Setting options:
Default setting:
Available networks
List of available mobile networks to which your 2N
gateway only works if logged in to a network that enables roaming for the
gateway SIM card provider.
Save button
Push this button to save the new settings.
Refresh button
Push this button to identify all available networks and display them in the
Available networks field.
Internet
Mode
Here determine the way of connecting to the Internet.
Setting options:
Default setting:
APN
The APN (Access Point Name) is the provider's Internet access code. If the item is
not filled in by the user, the gateway enters its data related to the selected
provider.
Default setting:
Table of Programmable Parameters
5-6 characters [0-9], MCC – 3 digits, MNC – 2-3 digits
Empty
Manual
®
2N EasyRoute gets connected to the Internet
whenever the Connect button in the STATUS menu is
pushed.
Auto
®
2N EasyRoute gets connected to the Internet
automatically whenever powered up.
Auto
Empty (database search)
®
EasyRoute from using the
®
EasyRoute
®
EasyRoute can log in. The
31