2N EasyRoute User Manual page 70

Default setting:
Timeout
Time limit for the DNS server response. If the DNS server fails to respond within
this timeout, a reply comes back saying that the address is unknown or invalid.
Setting options:
Setting step:
Default setting:
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
DDNS
Dynamic DNS is a system that is used for updating the server records on the
Internet domain in real time. The DDNS allows you to use a stable DNS name
instead of a variable IP address.
Enable
Enable/disable the use of the dyndns.org server by 2N
Setting options:
Default setting:
Username
Enter the username for DDNS connection. The user must be registered with the
dyndns.org server.
Setting options:
Default setting:
Password
Enter the access password for DDNS connection. The password must correspond
with the user password on the dyndns.org server.
Setting options:
Default setting:
Hostname
Enter the name that will be part of the gateway domain name on the DDNS. A
complete name is as follows: here_enter.dyndns.org
Setting options:
Default setting:
Update
Set a time interval for periodical DDNS data updating. After this time, the gateway
sends updated IP address information to the dyndns.org server.
Setting options:
Setting step:
Default setting:
Table of Programmable Parameters
20
1–30 s
1 s
10 s
ON/OFF
OFF
Alphanumeric characters
Empty
Alphanumeric characters
Empty
Valid domain name
Empty
1-86,400 s
1 s
60 s
®
EasyRoute.
70