2N EasyRoute User Manual page 76

Notification
A notification SMS is sent when the set value is reached. The PINGs must come in
a sequence to be considered.
Erase statistics
Set the PING rate statistics deleting command.
Min / Mean / Max time
The counter showing the response returning time from the server is displayed.
Count of errors / Total count
The counter showing all PINGs and errors is displayed. The statistic data are
floating.
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
GRE
Here set the VPN tunnel between two 2N
EasyRoute unit and a GRE-supporting device.
The principle is that you set a subnet and a public IP address on one device and then
the same on the other, thus creating an exclusive VPN tunnel between these two
devices.
Enabled
Enable/disable the GRE tunnelling function.
Setting options:
Default setting:
Network
Set the opposite subnet IP address and mask in the CIDR format, e.g.
192.168.24.0/21.
Setting options:
Default setting:
Endpoint
Set the public IP address of the opponent.
Setting options:
Default setting:
Save button
Push this button to save the new settings.
Table of Programmable Parameters
®
EasyRoute units, or between one 2N
Enabled / Disabled
Disabled
Valid IP address including subnet IP address
Empty
Valid public IP address
Empty
®
76