2N EasyRoute User Manual page 33

DNS1/DNS2
The IP address of the DNSs used, which is assigned by the provider upon network
login. Cannot be programmed!
IP
The IP address of the default gateway used, which is assigned by the provider
upon network login. Cannot be programmed!
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
FUP
The FUP (Fair User Policy) function is set in this menu. The maximum amount of
data to be transmitted is defined for a certain period of time. The limit is 100 GB.
One selection at least must be ticked off to make this service work. The service is
OFF by default. Exceeding leads to Internet disconnection until the counters are
reset.
Download
Enable that the preset limit should be applied to downloaded data. The second
parameter is for information only and displays the current amount of data
transmitted in the given direction. The third parameter sets the amount of data to
be transmitted. The fourth parameter defines units.
Setting options:
Default setting:
Upload
Enable that the preset limit should be applied to uploaded data. The second
parameter is for information only and displays the current amount of data
transmitted in the given direction. The third parameter sets the amount of data to
be transmitted. The fourth parameter defines units.
Setting options:
Default setting:
Download & Upload
Enable that the preset limit should be applied to downloaded and uploaded data.
The second parameter is for information only and displays the current amount of
data transmitted in the given direction. The third parameter sets the amount of
data to be transmitted. The fourth parameter defines units.
Setting options:
Default setting:
Time
Enable that the preset time limit should be applied to Internet connection. The
second parameter is for information only and displays the current time of
Table of Programmable Parameters
1 kB – 100 GB
20 MB
1 kB – 100 GB
20 MB
1 kB – 100 GB
20 MB
33