2N EasyRoute User Manual page 78

Apply button
Push this button to save the new settings.
Firmware
Module
Information on the module version and date of issue.
Bootloader
Information on the bootloader version and date of issue.
Firmware 0/1
Information on the firmware version, date of issue and downloading instance
number (behind the '#' symbol). An Active note is added to one of the firmware
instances to indicate the currently used one. The new firmware is stored
automatically, replacing the preceding one, and becomes active after restart.
Thus, whenever restarted, the gateway operates with the firmware version with
the highest serial number.
Choose...
Push this button to choose the path to firmware for updating.
Automatic reboot
Enable/disable the automatic gateway restart after firmware downloading.
Setting options:
Default setting:
Update button
Push this button to update the gateway firmware.
Time
Remember to set the SNTP server to make the system time work properly. If the
SNTP server is unavailable, system time is obtained from the GSM / UMTS
provider's module.
Time zone
Set the time zone according to the UTC standard and/or a shift with respect to
GMT 0.
Daylight saving time
Set whether the daylight saving (summer) time should be respected in the system
time and specify the count of hours for the shift.
Used – displayed in the daylight saving time mode.
Setting options:
Table of Programmable Parameters
ON/OFF
ON
OFF
+1 hour
+2 hours
78