2N EasyRoute User Manual page 72

Enable authentication
Enable/disable the use of another device-specifying parameter within the VRRP
network. Authentication is a sort of safety lock against unintentional misuse of
devices with identical IDs rather than a password or unauthorised access
prevention.
Setting options:
Default setting:
Password
Enter the VRRP device password. It is included in every VRRP packet transmitted
by the device.
Setting options:
Default setting:
Reporting interval
Set the interval for sending state notifications to IP address 224.0.0.18.
Setting options:
Setting step:
Default setting:
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
SNTP
SNTP (Simple Network Time Protocol) provides time synchronisation with the
selected server. A client supporting the SNTP only cannot be a server for other
clients.
Enable
Enable/disable the use of the NTP server as defined below.
Setting options:
Default setting:
NTP server name
Enter the NTP server domain name or IP address.
Setting options:
Default setting:
Update interval
Enter the synchronisation interval for the selected NTP server.
Setting options:
Setting step:
Default setting:
Table of Programmable Parameters
ON/OFF
OFF
1-8 alphanumeric characters
Empty
1-50 s
1 s
1 s
ON/OFF
OFF
NTP server address
Empty
5-43,200 min
1 min
60 min
72