2N EasyRoute User Manual page 67

Target
Define the target destination to which packets routed to specified ports are
forwarded. Obligatorily, the destination includes the IP address and the port.
Setting options:
Default setting:
Enable
Enable/disable port forwarding as defined in the table above the parameter.
Setting options:
Default setting:
Delete button
Push this button to remove the selected records.
Save button
Push this button to save the new settings.
Firewall > Port Filter
Used for restricting the gateway access in the LAN > WAN direction. If the
Firewall is active and the Port filter is enabled in this menu, the access through
the gateway is possible via selected ports only.
Protocol
Specify the protocol type for the packet to be filtered.
Setting options:
Default setting:
Port (Service)
Define the port to be used for the internal network – Internet communication. If
the selected port is associated with a service, the service is given in the
parentheses behind the port number, e.g. 23 (Telnet).
Setting options:
Default setting:
Enable
Enable/disable port filtering according to the rules defined above the parameter.
Setting options:
Default setting:
Delete button
Push this button to remove the selected records.
Save button
Push this button to save the new settings.
Table of Programmable Parameters
Valid IP address and port
Empty
ON/OFF
OFF
TCP
UDP
Both
TCP
0-65,535
Empty
ON/OFF
OFF
67