2N EasyRoute User Manual page 32

Dial
Fill in the telephone number of the requested service. This parameter is
determined by the provider.
Setting options:
Default setting:
User
Enter the username for connection to the provider. If you fail to fill in the name,
the gateway enters its own data related to the selected provider.
Default setting:
Password
Enter the password for connection to the provider. If you fail to fill in the
password, the gateway enters its own data related to the selected provider.
Default setting:
Note
To display the internal APN database, click on the [list] list. The currently
n
used data are highlighted in the table. If no table row is highlighted,
®
2N EasyRoute has no data on your provider. In that case, enter the data
manually.
LCP echo interval [0 – 3600 s]
Set the time interval after which the LCP echo should be sent.
LCP echo failures [0 - 10]
Set the count of unsuccessful LCP echo attempts after which the connection error
should be detected.
Max connect failures before reset
Set the count of unsuccessful connection attempts after which the system is
restarted.
Disconnection notification [1 – 3600s]
A notification SMS is sent when the defined period of time elapses. Errors must
come in a sequence to be considered.
Table of Programmable Parameters
0–15 characters (0–9, *, #, +)
Empty (database search)
Empty (database search)
Empty (database search)
32