2N EasyRoute User Manual page 65

Timeout
Set the ICMP sever response timeout. If no response is received within this
timeout, an error is detected.
Setting options:
Default setting:
Failure limit
Set the limit for error responses to PING queries. When this limit is reached, the
back-up connection is enabled.
Setting options:
Default setting:
Count of errors / Total count
This parameter is for information only. It counts wrong and correct PINGs. The
counter is reset whenever the first correct PING is received after a sequence of
errors.
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory
Caution
To make the system work properly, make sure that:
The WAN port is set and connected properly.
n
The UMTS-registered SIM card is inserted.
n
The back-up route is set.
n
An available ICMP Echo server is set.
n
Firewall > Basic
Enable Firewall
Here enable/disable the Firewall for communication from an internal network
(LAN, WiFi) to the Internet.
Setting options:
Default setting:
Enable remote administration
Enable/disable remote control of your gateway. This means that the gateway can
be configured not only from an internal network (LAN, WiFi) but also from the
Internet via the UMTS connection.
Setting options:
Default setting:
Table of Programmable Parameters
1 – 10,000 ms
500 ms
1 - 100
3
ON/OFF
ON
ON/OFF
OFF
settings).
65