2N EasyRoute User Manual page 74

Always accept remote host key
Enable this field to make the key acceptable before connecting to a server not
used so far. If this field is not Enabled, the server's public key is checked for
match with an earlier stored key when the server is used repeatedly and if no
match is found, the connection is rejected. This enhances security and prevents
some types of attacks.
Erase host key database
Whenever a change in the server's public key occurs, delete the stored list of keys
to enable the key check as described above.
Generate private key
Generate a key of your own for server connection. The key is displayed in the
Public key field.
Type
Select a type of the key to be generated.
Setting options:
Default setting:
Size
Set the size in bits for the key to be generated.
Setting options:
Default setting:
Save button
Push this button to save the new settings and launch the key generation.
SSH - Forwarding
The SSH forwarding function allows for port forwarding using the SSH tunnel.
Location
Select the side to initiate the connection.
Setting options:
Default setting:
Table of Programmable Parameters
RSA
DSS
RSA
As required by the server operator, we recommend you
to keep the value 1024. After a key of the required
value is stored, the size is reset to 1024.
1024
Remote
Local
Remote
74