2N EasyRoute User Manual page 44

Ringing tone – modulation
Set the ringing tone modulation, choosing one of the predefined dialtone patterns.
Setting options:
Default setting:
Error tone – frequency
Set the tone frequency in [Hz]. You can set up to two frequencies for a dual tone.
The first frequency is obligatory, the other is optional.
Setting options:
Setting step:
Default setting:
Error tone – modulation
Set the tone modulation, choosing one of the predefined dialtone patterns.
Setting options:
Default setting:
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
SLIC > Advanced
Ringing
Set the telephone line ringing voltage modulation, choosing one of the predefined
ringing patterns.
Setting options:
Default setting:
CLIP
Set this item to enable sending of a calling GSM line identification. The function
can be enabled if you have a FSK/DTMF (ETSI) receiving device on your telephone
line.
Setting options:
Table of Programmable Parameters
Continuous, 320/320/640/640 (Morse A), 330/330,
200/200, 250/250, 375/375, 500/500, 50/50,
1500/3000
1500/3000
100–4000 Hz
1 Hz
425 Hz for the first tone, the other is disabled
Continuous, 320/320/640/640 (Morse A), 330/330,
200/200, 250/250, 375/375, 500/500, 50/50,
1500/3000
50/50
1000/4000, 400/200/400/2000, 1500/3500,
2000/4000
1000/4000
Disable
®
2N EasyRoute restricts CLI towards the telephone line.
ETSI FSK
®
2N EasyRoute transmits CLI using FSK (Frequency
Shift Keying) to a telephone line.
ERF
44