2N EasyRoute User Manual page 43

Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
SLIC > Tones
Dialtone - frequency
Here set the dialtone frequency in [Hz]. You can set up to two frequencies for a
dual tone. The first frequency is obligatory, the other is optional.
Setting options:
Setting step:
Default setting:
Dialtone – modulation
Set the dialtone modulation, choosing one of the predefined dialtone patterns.
Setting options:
Default setting:
Busy tone – frequency
Set the busy tone frequency in [Hz]. You can set up to two frequencies for a dual
tone. The first frequency is obligatory, the other is optional.
Setting options:
Setting step:
Default setting:
Busy tone – modulation
Set the busy tone modulation, choosing one of the predefined dialtone patterns.
Setting options:
Default setting:
Ringing tone – frequency
Set the ringing tone frequency in [Hz]. You can set up to two frequencies for a
dual tone. The first frequency is obligatory, the other is optional.
Setting options:
Setting step:
Default setting:
Table of Programmable Parameters
100–4000 Hz
1 Hz
425 Hz for the first tone, the other is disabled
Continuous, 320/320/640/640 (Morse A), 330/330,
200/200, 250/250, 375/375, 500/500, 50/50,
1500/3000
Continuous
100–4000 Hz
1 Hz
425 Hz for the first tone, the other is disabled
Continuous, 320/320/640/640 (Morse A), 330/330,
200/200, 250/250, 375/375, 500/500, 50/50,
1500/3000
200/200
100–4000 Hz
1 Hz
425 Hz for the first tone, the other is disabled
ERF
43