2N EasyRoute User Manual page 56

RTS
The RTS value gives the packet size limit in bytes below which the CSMA/CA and
above which the RTS/CTS flow control should be used. Set the parameter to the
maximum value in the AP mode.
Setting options:
Setting step:
Default setting:
Fragmentation
Set the maximum size of packets for a wireless network.
Setting options:
Setting step:
Default setting:
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
Security
Encryption
®
Here set the 2N
Setting options:
Default setting:
Key format
Set the WiFi interface security key format.
Setting options:
Default setting:
Key
The WiFi security key consists of a sequence of alphanumeric characters or
hexadecimal symbols (as defined in the key format).
Setting options:
Default setting:
0–2,346 B
1 B
2,346 B
0–2,346 B
1 B
2,346 B
EasyRoute WiFi interface security levels.
None
WEP
WPA
WPA2
WPA+WPA2
None
ASCII / HEX
ASCII
For WEP key:
Enter 5, 13 or 16 alphanumeric characters or 10, 26 or
32 hexadecimal symbols.
For WPA/WPA2 key:
Enter 8 to 63 alphanumeric characters or 64
hexadecimal symbols.
Empty
Table of Programmable Parameters
56