2N EasyRoute User Manual page 22

FUP limit
Counter capacity according to FUP parameters.
Disabled
0 – 100%
Sent
Shows the total count of packets and (bytes) sent to the mobile network.
Received
Shows the total count of packets and (bytes) received from the mobile network.
SMS
Received / Sent
Count of SMS currently available in the received/sent SMS storage.
Total
Total count of SMS in the gateway, including the storages of received/sent SMS
and user-deleted SMS. The value in parentheses shows the current data space
occupied by SMS in the gateway, including the storages of received/sent SMS and
user-deleted SMS. If the value reaches the defined limit, all user-deleted
messages are removed and the free space is used for new incoming and outgoing
SMS.
Others
WLAN
Gateway WiFi network state.
Disabled
Enabled
WAN
Gateway WAN port state.
Disabled
Enabled
HotSpot
Current HotSpot state.
Disabled
Enabled
Table of Programmable Parameters
FUP not allowed.
Counter filling percentage; 100% results in Internet
disconnection.
WiFi network is deactivated.
WiFi network is activated.
WAN port is deactivated.
WAN port is activated.
HotSpot is deactivated.
HotSpot is activated.
22