2N EasyRoute User Manual page 64

Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
Back-Up Connection
Set the back-up connection switch parameters in this menu. You will need back-
up connection when your main provider is unable to provide full connectivity.
When the main connection fails, the gateway cannot establish the main server
connection and switches to the back-up system. Set the Error rate parameter to
define the count of error responses and the switching time. The main route is
restored when the first correct response comes from the ICMP server.
Back-up status
This indicator shows the current status of the gateway Internet connection. OFF
means that the primary route is used and ON means that the back-up connection
is used.
Display options:
Main route
Set the parameter for routing outgoing traffic to the Internet.
Setting options:
Default setting:
Back-up route
Set the parameter to route all outgoing traffic to the Internet in case the main
route is unavailable.
Setting options:
Default setting:
ICMP Echo server
IP address of a reliable, almost any time accessible server to be used as a
reference point. PING requests will be sent to this server and responses will be
evaluated. Having received the defined count of error responses in a sequence,
®
2N EasyRoute switches to the back-up connection.
Setting options:
Default setting:
Interval
Set the PING sending interval.
Setting options:
Default setting:
Table of Programmable Parameters
ON / OFF
None
UMTS
WAN
UMTS
None
UMTS
WAN
UMTS
Valid public IP address
Empty
1 – 86,400 s
1 s
64