2N EasyRoute User Manual page 46

Local port
Set the port to be used for SIP communication by 2N
Setting options:
Setting step:
Default setting:
Local RTP port
Set the port for RTP stream sending.
Setting options:
Setting step:
Default setting:
Count of RTP ports
Set the range of the RTP ports to be used.
Setting options:
Setting step:
Default setting:
Login timeout
When the preset time interval elapses, the gateway sends a new registration
packet to the SIP proxy as defined in the SIP > Account menu.
Setting options:
Setting step:
Default setting:
KeepAlive period
When the preset time interval elapses, the gateway sends a KeepAlive packet to
restore the gateway path storing time in the NAT router tables.
Setting options:
Setting step:
Default setting:
Codecs 1 to 5
Set the priorities of codecs 1 to 5. The lower the number, the higher the priority.
Setting options:
Default settings:
Note
®
Currently, 2N
n
G.723, PCMU and PCMA. Codec 5 is reserved for future codec extension.
So do not change the default values of Codec 5 for the time being
(Unused).
1 - 65535
1
5060
1 - 65535
1
10000
Without limitation
1
3
Without limitation [s]
1 s
60 s
Without limitation [ms]
1 ms
60 ms
G.729, G.723, PCMU, PCMA
Codec 1 – G.729
Codec 2 – G.723
Codec 3 – PCMU
Codec 4 – PCMA
Codec 5 – Unused
EasyRoute supports four types of codecs. They are: G.729,
Table of Programmable Parameters
®
EasyRoute.
46