2N EasyRoute User Manual page 75

Port
Set the port number to which requirements of the device connected to
®
2N EasyRoute should be routed.
Setting options:
Default setting:
Target
Set the IP address and port to which the connection is routed.
Setting options:
Default setting:
PING
The PING function allows for checking the connection with the defined server.
Enable
Enable the function.
Default setting:
ICMP echo server
Define the server to be checked by the PING service.
Setting options:
Default setting:
Interval
Set the checking interval for the server connection check.
Setting options:
Default setting:
Timeout
Set the maximum server response time.
Setting options:
Default setting:
Max failures before re-connect
Set the maximum count of attempts before the Peer-to-Peer Protocol (PPP) is
®
restarted in 2N
Setting options:
Default setting:
Port number
Empty
IP address:port number
Empty
Disabled
server name or IP address
Empty
1 to 86400s
5s
1 to 60s
3s
EasyRoute.
0 to 1000 (0 – no restart, 0 is not displayed)
0
Table of Programmable Parameters
75