2N EasyRoute User Manual page 52

Demodulation buffer
Set the size of the demodulation buffer.
Default setting:
Caution
The above mentioned parameters are used for precise setting and
n
debugging of the T.38 modulation. Any unprofessional intervention
may result in a modulation and/or FAX malfunction. These
parameters have factory settings and need not be changed under
normal conditions.
If necessary, ask a skilled technician for advice.
n
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
Baby Call
An off-hook initiates the countdown defined in the Dialling timeout parameter. If
no dialling is made within this timeout, the pre-set telephone number is dialled
automatically. If any digit is dialled, the BabyCall function is cancelled.
Enable
Here enable/disable the Automatic Call function.
Setting options:
Default setting:
Telephone number
Here enter the number to be used for the Automatic Call.
Setting options:
Default setting:
Dialling timeout
Set the time interval between the line off-hook and the beginning of the Automatic
Call (if enabled). During this timeout, 2N
the Automatic Call. Thus, you can make standard calls even if the BabyCall
function is enabled.
Setting options:
Setting step:
Default setting:
Table of Programmable Parameters
32 ms
ON/OFF
OFF
0–31 characters (0–9, *, #, +)
Empty
®
EasyRoute waits for a dialling to cancel
500–10000 ms
1 ms
5000 ms
52