2N EasyRoute User Manual page 69

Maximum leases
Here define the maximum count of network devices that are assigned the IP
address dynamically by the DCHP. Further addresses may be assigned statically
only.
Setting options:
Setting step:
Default setting:
Save button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
DNS
Enable
Here enable/disable the 2N
Setting options:
Default setting:
DNS1/DNS2
Mobile provider's servers or user-defined (LAN menu) servers to which the
gateway DNS refers for replies to queries.
Enable cache
Enable/disable the 2N
Setting options:
Default setting:
Cache low
Minimum number of DNS entries in the cache memory.
Setting options:
Setting step:
Default setting:
Cache high
Maximum number of DNS entries in the cache memory. When this limit is
reached, entries are deleted down to the minimum number of entries as provided
by the Cache low parameter.
Setting options:
Setting step:
Default setting:
Maximum sockets
Maximum number of requests that the DNS server can handle simultaneously.
Setting options:
Setting step:
Table of Programmable Parameters
1–250
1
50
®
EasyRoute DNS.
ON/OFF
ON
®
EasyRoute cache memory for DNS entries.
ON/OFF
ON
10–10000
1
100
10–10000
1
300
1–200
1
69