2N EasyRoute User Manual page 62

Channel
Set the channel to be used in the particular WiFi bandwidth (2.4/5 GHz) manually
or automatically.
Setting options:
Default setting:
Transmission rate
Set the WiFi interface transmission rate manually or automatically. The automatic
setting is only available now.
Setting options:
Default setting:
Tx power
Set the Tx power for the gateway WiFi transmitter.
Setting options:
Setting step:
Default setting:
Beacon
Set the beacon frame for regular SSID sending onto the WiFi interface.
Setting options:
Setting step:
Default setting:
RTS
The RTS value gives the packet size limit in bytes below which the CSMA/CA and
above which the RTS/CTS flow control should be used. Set the parameter to the
maximum value in the AP mode.
Setting options:
Setting step:
Default setting:
Fragmentation
Set the maximum size of packets for a wireless network.
Setting options:
Setting step:
Default setting:
Table of Programmable Parameters
Auto
Available channels
Auto
Auto
1–54 Mbps
Auto
Auto
Max
0–17 dBm
1 dBm
Max
15–65,535 ms
1 ms
100 ms
0–2346 B
1 B
2346 B
0–2,346 B
1 B
2,346 B
62