2N EasyRoute User Manual page 25

APN
The APN (Access Point Name) is the provider's Internet access code. If the item is
not filled in by the user, the gateway enters its data related to the selected
provider.
Default setting:
Dial
Fill in the telephone number of the requested service. This parameter is
determined by the provider.
Setting options:
Default setting:
User
Enter the username for connection to the provider. If you fail to fill in the name,
the gateway enters its own data related to the selected provider.
Default setting:
Password
Enter the password for connection to the provider. If you fail to fill in the name,
the gateway enters its own data related to the selected provider.
Default setting:
Apply button
Push this button to save the new settings.
Default button
Push this button to restore the default values (factory settings).
Note
To display the internal APN database, click on the [list] link. The currently
n
used data are highlighted in the table. If no table row is highlighted,
®
2N EasyRoute has no data on your provider. In that case, enter the data
manually.
Wireless
Enable
Enable/disable the WiFi network transmitter.
Setting options:
Default setting:
Service Set Identifier (SSID)
The SSID (Service Set Identifier) is a WiFi identifier transmitted to the users. It is
a string of up to 32 characters and represents a unique WiFi identifier in the area.
Setting options:
Default setting:
Table of Programmable Parameters
Empty (database search)
0–15 characters (0–9, *, #, +)
Empty (database search)
Empty (database search)
Empty (database search)
ON/OFF
OFF
1–32 characters
EasyRoute
25