Installing The G350 Media Gateway - Avaya S8500 Manual

Installing the G350 Media Gateway

An G350 Media Gateway or an G350 Media Gateway with an Avaya S8300 Media Server configured as
a Local Spare Processor (LSP) may be added to either an Avaya S8700 Multi-Connect or IP Connect
configuration or Avaya S8500 Media Server. To add a G350 Media Gateway, you must have a TN799DP
Control-LAN (C-LAN) circuit pack installed in the G650 Media Gateway. The G350 Media Gateway is
an endpoint on the C-LAN circuit pack.
Gateway connecting to the media server, on page 164
The general process for adding an G350 Media Gateway to an existing G650 Media Gateway follows:
•
Install the G650 Media Gateway.
•
Install and configure the G350 Media Gateway.
•
Add the media gateway to the media server translations.
•
Install a TN799DP (V5 or higher) C-LAN circuit pack.
•
Administer the C-LAN circuit pack by:
•
•
•
For more information on administering a TN799DP Control-LAN (C-LAN) circuit pack, see the
document Adding Hardware to Media Gateways section, TN799DP Control-LAN (C-LAN)
circuit pack.
For complete information on how to install and configure an G350 Media Gateway, see Installation of the
Avaya G350 Media Gateway (555-245-104).
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
December 2003
Figure 51, Sample configuration showing the G350 Media
Adding the node names and IP addresses for each G350 Media Gateway being added on
the IP Node Names screen.
Filling in the required fields on the IP Interfaces screen.
Enabling the Ethernet port.
shows a sample configuration.
163