Installing The Avaya G350 Media Gateway; Step 1: Mount The G350 Chassis; Mounting The G350 In A Rack - Avaya G350 Installation Manual

2
Installing the Avaya G350 Media
Gateway
This chapter describes the physical installation. Perform the following steps in order:
1

Step 1: Mount the G350 chassis

2
Step 2: Install the media modules
3
Step 3: Attach ground conductors
4
Step 4: Connect power to the G350
The steps are described in the sections below.
When you have installed the chassis and media modules and connected the power, you can move on to
Chapter 4, "Connecting
Step 1: Mount the G350 chassis
Mount the G350 in one of the following scenarios:
•
In a rack
•
On a wall
•
On a table
CAUTION:
When handling any components of an S8300 Media Server or G350 Media Gateway, wear
an anti-static wrist ground strap. Connect the strap to an approved ground such as an
unpainted metal surface.

Mounting the G350 in a rack

The G350 mounts in a standard 19-inch rack.
If the G350 is to be mounted in a rack, you can fasten the G350 to the rack either at the front of the G350
or at the middle. In either case, mounting brackets must be attached to the G350.
There are two types of mounting brackets provided with the G350:
•
Without cable guides - two mounting brackets without cable guides are provided.
•
With cable guides - one mounting bracket with cable guides is provided. This bracket provides
guides for electrical cables.
Mounting brackets without cable guides can be attached either to each side of the front of the G350 for
fastening the unit to the rack at the front or to the middle of each side panel of the G350 for fastening the
chassis to the rack at the middle.
Installation of the G350 Media Gateway
December 2003
devices", and connect external devices to the G350.

Installing the Avaya G350 Media Gateway

Step 1: Mount the G350 chassis
19