D Tx Code Channel Selection; D Tx Code Number Edit - Icom IC-F61M Instruction Manual

Uhf marine transceiver

Hide thumbs Also See for IC-F61M:

Table of Contents

BASIC OPERATION

D TX code channel selection

If the transceiver has [TX Code CH Select] assigned to it, the indi-

cation can be toggled between the operating channel number (or

name) and TX code channel number (or name). When the TX code

channel number (or name) is displayed, [CH Up] or [CH Down] se-

lects the TX code channel.

USING [TX CODE CH SELECT] KEY:

q Push [TX Code CH Select]— a TX code channel number (or

name) appears.

w Push [CH Up]/[CH Down] to select the desired TX code chan-

nel.

e After selecting, push [TX Code CH Select] to set.

• Return to the stand-by mode.

r Push [Call] to transmit the selected TX code.

USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:

If the transceiver has a [TX Code CH Up] or [TX Code CH Down]

key assignment, the programmed TX code channel can be se-

lected directly when pushed.

If the transceiver has [TX Code CH Select] or [TX Code Enter] as-

signed to it, TX code contents can be edited within the allowable

digits.

USING [TX CODE CH SELECT] KEY:

q Push [TX Code CH Select] to enter the TX code channel selec-

tion mode.

• Select the desired operating channel before entering the TX code

channel selection mode if necessary.

w Push [TX Code CH Select] for 1 sec. to enter the TX code edit

mode.

• The digit to be edited blinks.

Table of Contents