Tx Code Number Edit - Icom IC-440N Instruction Manual

8
SELCALL (Selective Calling)
e
Push or
r Push [PTT] to transmit on the selected TX code channel,
SCAN
or push (TX Code CH) to set the selected TX code
TAG
channels. Then repeat steps q through e, then push
[PTT] to transmit.
✓ CONVENIENT!
A TX code channel name can be assigned to all the 32 TX
code channels using the CS-440N
The TX code channel name allows you to select the channel
easier or to fi nd the channel user.
36
to select the desired TX code channel.
Appears
Transmitting
CLONING SOFTWARE
D

TX code number edit

SCAN (TX Code CH) enables you to change the TX code con-
TAG
tents within the allowed digits. The Group call function allows
you to edit a special 'Group code' of the Selcall ID code.
q
Select the desired CB channel ('CB-XX') except for chan-
nels 5 and 35. (p. 14)
w
Push F (Function) to enter the Function mode, then push
SET
SCAN
to enter the TX code channel selection mode.
TAG
• Push or
e
Hold down
SCAN
TAG
TX code edit.
The editable digit starts blinking
r Push
SCAN
(TX Code CH) to select the desired digit to be
TAG
edited.
.
to select the TX code channel, if desired.
(TX Code CH) for 2 seconds to start the