D Tx Code Number Edit - Icom IC-F51 Instruction Manual

D TX code number edit

If the transcever has [TX Code CH Select] or [TX Code Enter] as-
sgned to t, TX code contents can be edted wthn the allowable
dgts.
TO EDIT A TX CODE VIA [TX CODE CH SELECT] KEY:
q Push [TX Code CH Select] to enter the TX code channel selec-
ton mode.
• Select the desred channel usng [
w Push [TX Code CH Select] for 1 sec. to enter the TX code edt
mode.
e Push [TX Code CH Select] to select the desred dgt to be ed-
ted.
r Set the desred dgt usng
Code CH Down].
t Push [TX Code CH Select] to set the dgt. The edtable dgt wll
move to the rght automatcally.
y Repeat r and t to nput all allowable dgts.
u Push [Call] or [PTT] to transmt the selected TX code.
TO EDIT A TX CODE VIA [TX CODE ENTER] KEY:
q Select the desred TX code channel va [TX Code CH Up]/[TX
Code CH Down].
w Push [TX Code Enter] to enter the TX code edt mode.
e Push [TX Code Enter] to select the desred dgt to be edted.
r Set the desred dgt usng [
Code CH Down].
t Push [TX Code Enter] to set the dgt. The edtable dgt wll
move to the rght automatcally.
y Repeat r and t to nput all allowable dgts.
u Push [Call] or [PTT] to transmt the selected TX code.
CONVENTIONAL OPERATION
]/[ ] f necessary.
/[TX Code CH Up]/[TX
[ ]/[ ]
]/[ ]/[TX Code CH Up]/[TX
3
3
16