Memory Clearing - Icom IC-T70A Instruction Manual

■ Memory clearing

Contents of programmed memories can be cleared (erased),
if desired.
q Push and hold [S.MW](V/M/C) for 1 sec. to enter the select
memory write mode.
• 1 short and 1 long beep sounds.
• The " " icon and memory channel number blink.
• Do not hold [S.MW](V/M/C) for more than 2 seconds. Otherwise
the memory contents will be copied to the VFO mode.
w Rotate [DIAL] to select a desired memory channel to be
cleared.
[DIAL]
[EXAMPLE]: Clearing memory channel 14.
Push and hold for 1 sec.
The VFO mode Enter the select memory write mode.
Push
Push and hold
MEMORY/CALL CHANNELS
e Push [SET] repeatedly to select "CLEAR."
r Push and hold [S.MW](V/M/C) for 1 sec. to clear the con-
tents.
• 3 beeps sound.
• The cleared channel changes into a blank channel
• Return to the select memory write mode. Memory channel num-
ber blinks.
t Push [H/M/L] to exit the select memory write mode.
NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled.
Rotate to select a desired channel.
repeatedly to select "CLEAR."
for 1 sec to clear.
6
Channel 14
Push to return
to the VFO mode.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
38